Slide Weathervane Rod Into Cupola Roof, And Lock Into Place With Internal Mounting Bracket.

Slide the directional (nsew) over the tip of the rod. Set n to north and tighten the set screw. A traditional weathervane will have a brass rod approximately 28 inches long, a.

Place The Short Rod Into The Tubing Of The Mount.

There are no products listed under. Tighten the set screw provided on the mount. If the arrow on the weather.

Eagle, Heron, Duck, Or Any Weathervane With Extended Wings.

Use for fixing to a flat horizontal surface, such as the top of a post or cross bar of pergola. All one needs is a screw driver, as the parts of a weathervane slide onto the rod and are secured with set screws. How to install a weathervane.

When Mounting The Weathervane Without A Cupola, Such As A Roof Mount, One Will Need To Purchase The Hardware.

Locate your two assembly rods of the weathervane and start by screwing the small rod into the larger rod by hand. 800.762.8736 831.425.5505 weathervane installation methods weathervane installation overview there are a number of different ways to install weathervanes. Beautifully bespoke copper weathervanes :

Remove The Top Of Your Cupola If.

Our small weathervane can use our cupola. 7.)mounting a weathervane in a existing cupola. The tail fin catches the wind and the arrow points toward the direction the wind is blowing from.